The custom-made furniture is distinguished by the fashion of arranging the furniture hanging on the wall. Along the same lines, more and more furniture is defined by modules, especially kitchen furniture. This translates into a need for specific hangers with high performance and greater load capacity. The result of all this is the incorporation to our Emuca catalog of new hangers with different performances according to the different needs and characteristics of the customized designs.
Discover the new wall unit hangers, designed to hang on the wall your kitchen, bathroom and home cabinets and furniture:
Hanger for tall modules with Levelup 1 anti-tilt system
The Levelup 1 concealed hanger is designed for wall hanging of upper modules of cabinets in kitchen, bathroom and home furniture. It stands out for its anti-tilt system and for its adjustment in height of 18 mm and depth of 18 mm that varies the position of the module once it is hung on the wall. It has a high resistance and maximum safety, since it has a load capacity of up to 65 kg of weight per unit and is manufactured according to UNE-EN 15939 in type A frame.
For installation, two hangers are required, one on each side of the module, which are fastened with a quick mounting system on the outside with machining on the sides and back of the module. The hangers are hidden from view once mounted on the cabinet, the only point visible from the inside is a small machining that must be done to adjust the module. In addition, the Levelup 1 plate is required for wall mounting.
Concealed hanger for tall units Levelup 2
The Levelup 2 concealed hanger is designed for wall hanging of upper modules of cabinets in kitchen, bathroom and home furniture. It stands out for its height adjustment of 14 mm and depth of 15 mm that varies the position of the module once it is hung on the wall. It has a high resistance and maximum safety, since it has a load capacity of up to 50 kg per unit and is manufactured according to UNE-EN 15939 standard in type A frame.
For installation, two hangers are required, one on each side of the module, which are fixed to the outside with machining on the sides and back of the module. The hangers are hidden from view once mounted on the cabinet, the only point visible from the inside is a small machining that must be done to adjust the module. In addition, the Levelup 2 plate is required for wall mounting.
Hanger for tall modules Hover
The Hover hanger is designed to hang on the wall the upper modules of cabinets in kitchen, bathroom and home furniture. It stands out for its height adjustment of 14 mm and depth of 15 mm that varies the position of the module once it is hung on the wall. It has a high resistance and maximum safety, since it has a load capacity of up to 35 kg of weight per unit and is manufactured according to UNE-EN 15939 in type A frame.
For installation, two hangers are required, one on each side of the module, which are fixed to the inside of the module on the sides, screwed or press-fitted depending on the model. In addition, for its assembly it requires machining on the back and for its placement on the wall it is necessary to use the Hover plate.
Hanger for tall modules Mini
The Mini hanger is designed to hang on the wall the upper modules of cabinets in kitchen, bathroom and home furniture. It stands out for its reduced dimensions and itsheight adjustment of 7 mm that varies the position of the module once it is hung on the wall.
For installation, two hangers are required, one on each side of the module, which are fixed to the outside of the module by screwing them to the sides. In addition, the Mini plate is required for placement on the wall.
