If you need more light for your wardrobe, here are some good news. In order to do so, you do not need to have a great knowledge about electricity or to spend hours and hours with the electrician. You just need the right product. There are LED solutions that will light up your clothes in the dark in just a few minutes and make your life a bit easier. Keep an eye on the alternatives!
Wireless LED lights
Installing a LED light powered by a battery or by rechargeable batteries is one of the easiest ways to illuminate your wardrobe without complications. It will add light to a specific point in its interior, where you need it, and you won’t have to manipulate the electricity installation in your house or have an outlet nearby. It won’t either require complex works, since installing them it is enough to place a few screws or adhesive tape in most cases.
This type of light will simplify your life a bit when looking for what you need in the wardrobe. Due to its sensors, they automatically turn on when you approach to grab an item and they turn off by themselves after a few seconds. This way, not only will you be saving time not looking for the switch, but you will also minimise the risk of leaving the light on.
There are different wireless lights for wardrobes and choosing one model will depend on the specific needs of your space or the type of feed you would like.
Led appliances
These lights are very versatile. You may use them to increse the general lighting in your wardrobe or for a specific area where visibility is not that good. They are a good alternative, for example, if a shelf divides your wardrobe in two and the lower part, by its depth or disposition, is very dark. Again, also if you have a modular wardrobe and not enough light reaches one of the spaces. In both cases, installing a LED light on the upper part will be sufficient to solve the problem.
The Phoenix model by Emuca, a compact rectangular light you can easily fix anywhere in your wardrobe with a few screws, works with batteries and offers cool white light. Besides having a movement sensor that reaches up to 2 metres, this appliance has a feature that contributes to its versatility: it comes with a mechanism that allows to direct the light beam wherever you want. In this way, you can increase the light in that specific area in which by need or aesthetics, you need the light to be more intense.
How do you install it? Screws.
How do you charge it? Batteries
If you prefer a light which batteries you don’t have to replace every once in a while, the Draco model saves you this task: it works with rechargeable batteries you can charge through a mini USB port. This light, also offers cool white light, it has a twilight sensor preventing turning the light on if there is sufficient lighting in the wardrobe, this LED will save you energy and will increase charge cycles.
How do you install it? Screws or adhesive tape.
How do you charge it? Batteries rechargeable with a mini USB.
You may charge the Kraz model directly with your phone charger, provided they are compatible, thanks to its rechargeable battery. It comes with a micro USB port and a LED charge indicator that will alert you when you need to charge it. Installation is simple: fix the base where you want with the screws included or use magnets. To charge it just take the battery out of the light fitting. In this case, it gives a natural white light, very similar to sunlight.
How do you install it? Screws or adhesive magnet.
How do you charge it? Battery rechargeable with a mini USB
LaThe Crater light fitting characteristics are very similar to the previous model, but it is round! With an up-to-date look, this light comes with a mini USB port to recharge its battery and offers natural white light.
How do you install it? Screws or adhesive magnet.
How do you charge it? Battery rechargeable with a mini USB
Specific light for drawers
And if what you need is to light is one of the drawers in your wardrobe? Whether it is an XXL drawer where you keep a lot of things and you can’t see the back or it is a badly lit area, installing a Drawled model light by Emuca will make things easier for you. In this case, instead of a movement sensor, it comes with a sensor that activates with the vibration from opening the drawer. And like the other illumination solutions for Emuca wardrobes, it has a timer for light to turn it off after a few seconds.
How do you install it? Screws or adhesive tape.
How do you charge it? Batteries
For the most skilful: an illuminated rail
If you want to go one step further, you may convert the rail in your wardrobe into a LED light illuminating its interior. This is what the Castor illuminated rail by Emuca offers, and like all other range of products, it does not require any kind of electricity installation. In this case, the light has a removable battery you can take out whenever you want without disassembling the rail as a whole. You will only need to take out the battery, connect it to the micro USB port and you are ready to go. The tube, which offers natural white light, may be cut to measure to adjust it to your space. It is a bit more complex alternative than the previous models, but the outcome is worth it.
How do you install it? Screws.
How do you charge it? Battery rechargeable with a mini USB
As you can see, illuminating the wardrobe is easier than it looks. Choose the product that best suits your space and needs. If you have any questions regarding the products, leave a comment!
