Discover the new Vertex drawer, with an elegant extra fine design and straight lines, perfect to equip your furniture following the latest trends in design and functionality.
Design
Elegant extra-thin design with straight lines, perfect to equip your furniture with the latest trend.
Great stability
It stands out for its runners of three telescopic bodies, of reduced height, with a load capacity of 40kg.
Finishes
Available in satin white or anthracite gray, with four different heights 83, 93, 131 and 178 mm.
It stands out for its three telescopic runner slides, of reduced height, offering great stability and soft sliding of the drawer. It can support 40 kg and with soft close and a cushioned pull-out stopper.
Said sides are made of steel sheet painted with epoxy and dimensioned for a board thickness of 16 mm in the lower and back sides of the drawer. They are available in a white satin finish (RAL9003) or anthracite grey (RAL7043) and comes in four different heights (83, 93, 131 and 178 mm) and different depths.
It is easy and simple to assemble and the boards do not require machining with staples on the sides to enable machine assembly. It also enables horizontal and vertical adjustment of the front side from inside the drawer and includes a locking and anti-pull off system in the sides.
The 178 mm-high drawer fixing is done through a new double clip fitting, resulting in a stronger and more stable fixing.
The Vertex drawer is supplied in kits including all the fittings required for exterior drawers. In order to build pot and pan drawers, use the Concept side railings that can be installed at any height and do not require any machining for the back side.
You can complete your kitchen drawers with Optima cutlery holders, designed in all the measures for all the existing modules with a drawer depth of 500 mm. In addition, you may use Concept marking templates for the front fitting and the Lokbox for the front-bottom joint.
